[2023] Use Valid Exam NCS-Core by TestPDF Books For Free Website
Free NCS Professional NCS-Core Official Cert Guide PDF Download
NEW QUESTION # 25
A CEO asks the IT administrator to provide a list of required resources to protect current workloads and the two new SQL servers from a disaster. The Nutanix environment is managed by Prism Central.
Which option explains how to meet the CEO's request?
- A. Create a new Recovery policy by selecting the VM that needs to be protected and get hardwarerequirements.
- B. Create a new project and assign theVMs to it to get compute and storage requirements.
- C. In Capacity Runway, select Optimize Resources and select all VMs that must be protected.
- D. Create a new scenario based on a new cluster based on a VM Profile and select Recommend.
Answer: A
NEW QUESTION # 26
A system administrator needs to shut down an AHV node in a Nutanix cluster without causing service disruption. The administrator checks data resiliency and verifies that the cluster can tolerate a node down.
Which three steps should the administrator perform next? (Choose three.)
Answer:
Explanation:
Explanation
1 allow vms2 sd CVM3 sd node
NEW QUESTION # 27
An administrator inherits a new Nutanix environment and logs in to a CVM to check the network configuration. The configuration is as follows:
Which action should the administrator take to improve network performance?
- A. Configure VLAN tagging both on br0 and br1 and their physical interfaces.
- B. Remove one 10 Gbs interface from br0-up to make sure all 10 Gbs can be used.
- C. Add eth0 and eth1 to the br0-up bond
- D. Configure balance-sib or balance-tcp mode for br0-up if switch configuration allows
Answer: D
NEW QUESTION # 28
After the migration, some SQL queries take longer to execute than prior to migration.
The following SQL best practices were applied while creating the SQL VM on Nutanix:
*8 vDisks per SQL server VM
*Database and Log files on separate vDisk
*2 TempDB database drives and 1 TempDB log drive
What should the administrator to do improve the SQL Server performance?
- A. Create multiple SQL log files and disable autogrowth
- B. Create multiple TempDB data files and enable autogrowth
- C. Redistribute existing data by creating additional database file and enable autogrowth
- D. Redistribute existing data by creating additional database files and disable autogrowth
Answer: C
NEW QUESTION # 29
An administrator configure Active Directory (AD) authentication for their Nutanix environment. When login in using an AD user account, the login process takes more than one minute to complete. No delay occurs when logging a local account.
What should the administrator confirm to resolve this issue?
- A. The domain controller being used is configured as a global catalog server.
- B. The service Account Username is correct for the domain.
- C. Active directory lookups are configured to use Non-Recursive mode.
- D. The user search base for the group is configuredcorrectly
Answer: C
NEW QUESTION # 30
An administrator configures authentication in Prism Central (PC) for the NTNX-Admins group. Users report that they are unable to log in. The administrator confirms that the Active Directory (AD) settings in PC are correct.
Which condition could result in this behavior?
- A. The users must be added to the Domain Admins AD group.
- B. The Local authentication type must also be selected in PC.
- C. A role mapping needs to be associated with the AD group.
- D. A client chap certificate must also be added in PC.
Answer: A
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_10:mul-security
NEW QUESTION # 31
Refer to the exhibit.
A system administrator is using Range-Autofill tool to assign IP addresses to setup a multi-block cluster based on the following configuration:
Which additional changes must be made during the Foundation process to configure the cluster correctly?
- A. Change host names
- B. Reorder blocks
- C. Reorder block serial
- D. Change IP address
Answer: A
NEW QUESTION # 32
An administrator has a custom backup application that requires a 2TB disk and runs in Windows. Throughput is considerably lower than expected.
The application was installed on a VM with the following configuration:
* Four vCPUs with one core/vCPU
* 4GB of Memory
* One 50GB vDisk for the Windows installation
* One 2TB vDisk for the application
What is the recommended configuration change to improve throughput?
- A. Increase the number of cores per vCPU
- B. Add 4GB of memory to the VM
- C. Increase the vCPUs assigned to the VM
- D. Span the 2TB disk across four vDisks
Answer: D
NEW QUESTION # 33
A consultant is preparing to add new nodes into an existing cluster. The current cluster AOS version is 5.8.
The new expansion node is currently running AOS 5.9 code. The cluster must continue to run at its current AOS version.
Which method can be used to successfully add the node?
- A. Upgrade the cluster to 5.9 and add the node through Prism Element.
- B. Use Prism Element, which will downgrade the node by default during the node add process.
- C. Use the CLI and enter cluster add-node node-serial="node_serial".
- D. Use Prism Element to Expand the cluster and select the re-image option.
Answer: D
NEW QUESTION # 34
Refer to the exhibit.
An administrator creates a security policy that isolates their financial application from accessing the Internet When viewing the policy in Prism Central, several connections from the application are outbound to the Internet.
What is causing this issue with the policy?
- A. The policy has been left in monitor mode instead of enforcing mode.
- B. The blockedconnections are illustrated for information only.
- C. The Activate box was not checked in the rule, so it is not enforcing.
- D. The 0.0.0.0 address was not specified in the outbound rule.
Answer: A
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v510:mul-security-polic
NEW QUESTION # 35
After a recent installation using a flat switch, a consultant notices issues migrating the Nutanix nodes to the customer's network. The customer states that they are using VLANs on the production switch but not on the dedicated switch for IPMI. The customer does not require a manual configuration of the host and CVM.
What network changes need to be made to correct the issues?
- A. Us untagged VLANs for the CVM and host and trunk mode for IPMI.
- B. Use tagged VLANs for the CVM and host and access mode for IPMI.
- C. Use Native VLANs for the CVM and host and access mode for IPMI.
- D. Use Native VLANs for the CVM and host and trunk mode for IPMI.
Answer: C
NEW QUESTION # 36
A consultant is planning an installation and needs to collect configuration items to be used during the install.
The data needed from the customer are IP addresses, Gateway, DNS servers, and NTP Servers.
Which Cluster Deployment document must be completed with the customer?
- A. Project Plan
- B. Questionnaire
- C. Technical Checklist
- D. Operations Guide
Answer: C
NEW QUESTION # 37
An administrator is responsible for the following Nutanix Enterprise Cloud environment:
* A central datacenter with a 20-node cluster with 1.5PB of storage
* Five remote sites each with a 4-node cluster with 200TB storage
The remote sites are connected to the datacenter via 1GB links with an average latency of 6 ms RTT. What is the minimum RPO the administrator can achieve for this environment?
- A. 0 minutes
- B. 6 hours
- C. 1 hour
- D. 15 minutes
Answer: D
Explanation:
Explanation
Ref:https://support-portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:wc-p
NEW QUESTION # 38
An administrator knows that the disks in a cluster are out of date and a new firmware is available. For security reasons, these clusters do not have access to theInternet.
Which two steps must be completed to update the firmware? (Choose two.)
- A. Select Upgrade Software, then select disks and upload the updated firmware.
- B. Download the updated firmware .tgz file from the Nutanix portal.
- C. Configure LCM with a URL to access the firmware bundle.
- D. Download a dark site bundle and stage it on an internal webserver.
Answer: C,D
NEW QUESTION # 39
After uploading a hypervisor ISO during the Foundation process, a consultant sees a message that the MD5 sum for the hypervisor is not found in the Whitelist file.
Which step should the consultant take next to resolve this issue?
- A. Restart the Foundation process and upload the hypervisor again.
- B. Download the hypervisor ISO again from the vendor website.
- C. Download the latest hypervisor ISO whitelist file from Nutanix portal.
- D. Check the hypervisor version in the Nutanix Compatibility Matrix.
Answer: C
NEW QUESTION # 40
An administrator is deploying a three-tier application on a Nutanix Enterprise Cloud consisting of web, application, and database VMs. Traffic between theservers must be limited to specific services/ports. There is an application layer firewall VM deployed on one host in the cluster.
In which way should the administrator meet this requirement?
- A. Separate the web. application and database VMs on to dedicated VLANs
- B. Categorize the VMs in Prism Central and utilize Flow to set a security policy
- C. Create a network for each type of VM, and use policy-based routing to control the traffic flow
- D. Configure a security policy and service chain redirecting the server traffic through the firewall
Answer: B
NEW QUESTION # 41
A consultant is preparing to foundation over a customer network that has the following criteria:
* VLAN segmented network
* VLAN tags on the nodes must be imaged prior to starting the foundation process.
For each node, the consultant has done the following:
* Connected to the Network Crash Cart of the Node
* Logged in using "root" credentials
What should the consultant do next?
- A. 1. CD to /home/data/nutanix/nutanix-network-crashcart/
2. Start Network Utility tool by running: ./network_configuration
3. Change Values - B. 1. CD to /root/nutanix-network-crashcart/
2. Start Network Utility tool by running: ./network_configuration
3. Change Values - C. 1. Log into CVM using [email protected]
2. CD to /home/data/nutanix/nutanix-network-crashcart/
3. Start Network Utility tool by running: ./network_configuration
4. Change Values - D. 1. Log into CVM using [email protected]
2. CD to /root/Nutanix-network-crashcart/
3. Start Network Utility tool by running: ./network_configuration
4. Change Values
Answer: B
NEW QUESTION # 42
......
Successful completion of the NCS-Core exam demonstrates that the candidate has a deep understanding of Nutanix Core Infrastructure and can design, deploy, and manage Nutanix solutions effectively. It also highlights the candidate's ability to troubleshoot and maintain Nutanix infrastructures, which are critical skills in today's IT industry. Nutanix Certified Services Core Infrastructure Professional certification is recognized globally and is highly valued by employers looking for IT professionals with a strong foundation in Nutanix technology. The NCS-Core certification is an excellent way for IT professionals to showcase their skills and expertise in Nutanix Core Infrastructure and set themselves apart from their peers in the industry.
Nutanix NCS-Core Official Cert Guide PDF: https://braindumps.testpdf.com/NCS-Core-practice-test.html
