New (2024) Download free 500-430 PDF for Cisco Practice Tests
100% Free 500-430 Files For passing the exam Quickly
Cisco 500-430: Cisco AppDynamics Professional Implementer exam is a certification exam that tests the candidate's knowledge and skills in implementing and configuring AppDynamics solutions. 500-430 exam is designed for professionals who have experience in implementing and managing AppDynamics solutions in enterprise environments. Cisco AppDynamics Professional Implementer certification exam is a great way for IT professionals to validate their expertise and demonstrate their proficiency in AppDynamics implementation.
NEW QUESTION # 22
What becomes more important as an AppDynamics Controller grows beyond supporting 500 agents?
- A. RAM allocated to the Controller
- B. CPU utilization
- C. Disk VO
- D. Thread count on the GlassFish server
- E. Network throughput
Answer: E
Explanation:
Explanation
As an AppDynamics Controller grows beyond supporting 500 agents, network throughput becomes more important. This is because the Controller needs to handle a large volume of data from the agents, as well as serve requests from the UI and API clients. Network throughput is the measure of how much data can be transferred over a network in a given time. A low network throughput can cause delays, errors, or timeouts in the communication between the Controller and the agents or clients. Therefore, it is recommended to monitor the network throughput of the Controller and ensure that it meets the minimum requirements for the expected load123. References: Controller System Requirements, Performance and Controller Sizing Guidelines, How to Run AppDynamics in Microsoft Azure
NEW QUESTION # 23
What are two actions that an administrator should take to upgrade an EUM Server that is currently in production? (Choose two.)
- A. Stop the EUM agents,
- B. Run the new installer on the ELUM host machine.
- C. Stop the EUM server before the upgrade.
- D. Upgrade the EUM agents.
- E. Update the EUM Server access key.
Answer: B,C
Explanation:
Explanation
To upgrade an EUM Server that is currently in production, the administrator should follow these steps:
Stop the EUM Server before the upgrade. This ensures that the EUM Server does not process any incoming data from the EUM agents during the upgrade process. The administrator can use the eum.sh or eum.bat script to stop the EUM Server gracefully1.
Run the new installer on the EUM host machine. The installer will detect the existing EUM Server installation and prompt the administrator to upgrade it to the latest version. The installer will also migrate the EUM data from the old version to the new version, if needed. The administrator should follow the instructions on the installer wizard to complete the upgrade2.
The other options are not necessary or correct for upgrading the EUM Server. The administrator does not need to stop or upgrade the EUM agents, as they are compatible with the new version of the EUM Server. The administrator does not need to update the EUM Server access key, as it remains the same after the upgrade. The administrator does not need to install MySQL, as it is bundled with the EUM Server installation package2. References: Upgrade the Production EUM Server and Start and Stop the EUM Server in the AppDynamics documentation.
NEW QUESTION # 24
Which framework would require the implementation of custom correlation?
- A. Custom TCP concurrent server
- B. Pre-packaged WCF application
- C. Customer proprietary SOAP application
- D. Vendor-supplied enterprise application that uses JMS
Answer: A
Explanation:
Explanation
Custom correlation is needed when the default detection mechanisms of AppDynamics are not capable of auto-correlating transactions across tiers or across parent-child threads in complex multithreaded applications.
Custom correlation enables the user to configure AppDynamics to propagate a unique correlation key by using the extension points of the distributed protocol or by decorating the payload. Among the four options, a custom TCP concurrent server is the most likely to require the implementation of custom correlation, as it is an unsupported framework and protocol that may not have easily-defined method calls or payload objects to configure as exit points or entry points. The other options, such as SOAP, JMS, and WCF, are supported by AppDynamics and can be automatically correlated by the agents without the need for custom configuration. References: Custom Correlation for Java Applications and Configure Custom Correlation for
.NET Applications in the AppDynamics community.
NEW QUESTION # 25
Which type of Alert and Respond action is available only on an on-premises Controller?
- A. Cloud auto-scaling
- B. Remediation action
- C. Diagnostic action
- D. Custom action
Answer: D
Explanation:
Explanation
A custom action is a type of Alert and Respond action that allows you to integrate AppDynamics notifications with your own alerting or ticketing system. You can create a custom action by writing an executable script and an XML file that describe how to pass information from AppDynamics to your system. A custom action can be triggered by a policy based on a health rule violation or an event. A custom action is available only on an on-premises Controller, because it requires access to the Controller file system and the ability to execute scripts on the Controller host machine. For a SaaS Controller, you can use HTTP request templates instead of custom actions to integrate with external systems. References: Build a Custom Action, Alert and Respond, Actions, Custom Actions
NEW QUESTION # 26
A Java-based web application was instrumented. The browser snapshots provide a detailed look at an individual page request, however the correlated server-side snapshots are missing for all requests. What are two reasons for this missing correlated server-side snapshots? (Choose two.)
- A. Server side application is not instrumented with server agent.
- B. Correlated snapshots are visible only if the injection mechanism is Automatic.
- C. Correlated server-side snapshots work only for NET Applications.
- D. Correlated snapshots are visible only if browser is Chrome.
- E. Server has set the the HitpOnly flag on all cookies.
- F. Correlated server-side snapshots are visible only if Java version is 1.7+.
Answer: A,E
Explanation:
Explanation
According to the Cisco AppDynamics Professional Implementer (CAPI) documents, the two reasons for the missing correlated server-side snapshots are:
Server has set the HttpOnly flag on all cookies. (A) This is a valid reason because the HttpOnly flag is a security feature that prevents client-side scripts from accessing the cookies. However, the AppDynamics JavaScript Agent relies on the cookies to correlate the browser snapshots with the server-side snapshots.
The JavaScript Agent injects a cookie named _appdyn_browser into the browser requests, which contains the correlation information. If the server sets the HttpOnly flag on all cookies, including the
_appdyn_browser cookie, the JavaScript Agent cannot read or modify the cookie, and the correlation fails. To enable the correlation, the server should not set the HttpOnly flag on the _appdyn_browser cookie12.
Server-side application is not instrumented with server agent. (E) This is a valid reason because the server-side snapshots are collected by the AppDynamics app agents that instrument the application servers. The app agents monitor the business transactions that are executed by the server-side application, and capture the execution context, call graphs, errors, and metrics. If the server-side application is not instrumented with the app agent, the server-side snapshots are not available, and the correlation fails. To enable the correlation, the server-side application should be instrumented with the app agent that is compatible with the application server and the Controller34.
The incorrect options are:
Correlated server-side snapshots work only for .NET Applications. (B) This is not a valid reason because the correlated server-side snapshots work for any application server that is instrumented with the AppDynamics app agent, not only for .NET applications. The AppDynamics platform supports various application servers, such as Java, .NET, PHP, Node.js, Python, and C/C++. The app agents collect the server-side snapshots for the business transactions that are executed by the application server, regardless of the programming language or framework34.
Correlated snapshots are visible only if the injection mechanism is Automatic. This is not a valid reason because the correlated snapshots are visible regardless of the injection mechanism. The injection mechanism refers to the way the AppDynamics JavaScript Agent is inserted into the web pages. There are two injection mechanisms: Automatic and Manual. The Automatic injection mechanism uses the app agent to inject the JavaScript Agent into the web pages that are served by the application server. The Manual injection mechanism requires the user to manually insert the JavaScript Agent into the web pages. Both injection mechanisms support the correlation of the browser snapshots and the server-side snapshots, as long as the JavaScript Agent and the app agent are configured correctly .
Correlated snapshots are visible only if browser is Chrome. (D) This is not a valid reason because the correlated snapshots are visible regardless of the browser. The AppDynamics JavaScript Agent supports various browsers, such as Chrome, Firefox, Safari, Edge, and Internet Explorer. The JavaScript Agent collects the browser snapshots for the web pages that are loaded by the browser, and correlates them with the server-side snapshots, regardless of the browser type or version .
Correlated server-side snapshots are visible only if Java version is 1.7+. (F) This is not a valid reason because the correlated server-side snapshots are visible regardless of the Java version. The AppDynamics Java Agent supports various Java versions, such as 1.5, 1.6, 1.7, 1.8, and 11. The Java Agent collects the server-side snapshots for the business transactions that are executed by the Java application server, and correlates them with the browser snapshots, regardless of the Java version or vendor .
References:
1: Browser Snapshots - AppDynamics
2: Troubleshoot Browser RUM - AppDynamics
3: Transaction Snapshots - AppDynamics
4: Supported Environments and Versions - AppDynamics
[5]: Browser Real User Monitoring - AppDynamics
[6]: Set Up and Configure Web EUM - AppDynamics
[7]: Browser Support - AppDynamics
[8]: Java Agent - AppDynamics
[9]: Java Supported Environments - AppDynamics
NEW QUESTION # 27
What is the correct method to perform a NET Agent upgrade?
- A. Perform the agent upgrade on the application server host by running the MSI Installer Package.
- B. Perform the agent upgrade on the application server host by running the Agent Configuration Utility.
- C. Perform the agent upgrade via the AppDynamics Controller Ul.
- D. Perform the agent upgrade on a remote server host by using the AppDynamics Controller REST API.
Answer: A
Explanation:
Explanation
According to the Cisco AppDynamics Professional Implementer (CAPI) documents, the correct method to perform a NET Agent upgrade is to perform the agent upgrade on the application server host by running the MSI Installer Package12. This method will install updated agent files and maintain legacy configurations. You do not need to uninstall the old agent first when you upgrade from the NET Agent >= 3.9, except for patch releases. You need to stop IIS, instrumented Windows services, and instrumented standalone applications before running the MSI Installer Package. You also need to launch an elevated command prompt with full administrator privileges and specify youraccount access key for single-tenant Controller accounts. After the installation, you need to restart Windows services and standalone applications.
The incorrect options are:
Perform the agent upgrade on a remote server host by using the AppDynamics Controller REST API.
(B) This is not a valid method for upgrading the NET Agent, because the AppDynamics Controller REST API does not provide any endpoint for agent installation or upgrade. The REST API is mainly used for retrieving or updating configuration data, metrics, events, snapshots, and other information from the Controller3.
Perform the agent upgrade on the application server host by running the Agent Configuration Utility.
This is not a valid method for upgrading the NET Agent, because the Agent Configuration Utility is a tool for modifying the agent configuration after installation, not for installing or upgrading the agent. The Agent Configuration Utility allows you to change the Controller connection settings, the agent logging level, the proxy settings, and other advanced options4.
Perform the agent upgrade via the AppDynamics Controller UI. (D) This is not a valid method for upgrading the NET Agent, because the AppDynamics Controller UI does not provide any feature for agent installation or upgrade. The Controller UI is mainly used for monitoring, analyzing, and troubleshooting the performance of the applications, business transactions, tiers, nodes, and other entities that are instrumented by the agents5.
References:
1: Upgrade the .NET Agent for Windows - AppDynamics
2: Release Upgrade Checklist for .NET Agents - AppDynamics
3: REST API - AppDynamics
4: Configure the .NET Agent - AppDynamics
5: AppDynamics Application Performance Monitoring Platform - AppDynamics
NEW QUESTION # 28
Which directory should an administrator back up if the goal is to back up the EUM Server?
- A. <controller_home=/bin directory
- B. <controller_home>/bin/eum_server directory
- C. <controller_home>
- D. <eum_server_home= directory
Answer: D
Explanation:
Explanation
The <eum_server_home> directory contains the EUM Server installation files, configuration files, and data files. It is recommended to back up this directory as a precaution before upgrading or migrating the EUM Server. The default location of this directory is <installDir>/AppDynamics/EUM, where <installDir> is the directory where you installed the Controller. You can also use the backup-eum.sh script to back up the EUM Server data12. References: Upgrade the Production EUM Server, Configure the EUM Server
NEW QUESTION # 29
Which two user accounts are created by the AppDynamies Controller during installation? (Choose two.)
- A. MySQL appd admin user
- B. REST API user
- C. Elastic search root user
- D. OS user that will run the controller
- E. Customer-specified Controller administrator account
- F. GlassFish asadmin user
Answer: E,F
Explanation:
Explanation
The AppDynamics Controller is a Java web application that runs on a GlassFish application server and uses a MySQL database. During the installation of the Controller, two user accounts are created by default:
The GlassFish asadmin user is the administrative user for the GlassFish server. This user has the authority to start, stop, and configure the GlassFish server and its domains. The default username for this user is admin and the default password is appdynamics. You can change the password for this user after the installation by using the asadmin command-line tool1.
The customer-specified Controller administrator account is the user account that you provide during the installation wizard. This is the account that you use to access the AppDynamics User Interface (UI) for the first time and perform various tasks such as creating applications, configuring agents, managing users and groups, and so on. You can choose any username and password for this account, but AppDynamics recommends using only ASCII characters. You can also create additional user accounts in the Controller UI after the installation2.
The other options are not user accounts that are created by the Controller installation. The Elastic search root user, the REST API user, and the MySQL appd admin user are user accounts that are used internally by the Controller components and are not exposed to the end user. The OS user that will run the controller is a user account that you need to create on the host machine before the installation, and it is not created by the Controller installation3. References: Controller Installation, Manage Users and Groups, and Update the Root User and Glassfish Admin Passwords in the AppDynamics documentation.
NEW QUESTION # 30
What describes the EUM agent?
- A. It communicates with the AppDynamics Controller.
- B. It communicates with the EUM Collector.
- C. It communicates with the Events Service.
- D. It communicates with the Machine Agent.
Answer: B
Explanation:
Explanation
The EUM agent is a special agent that runs in web, mobile, or IoT applications and collects metrics on the end user experience. The EUM agent communicates with the EUM Collector, which is a component that verifies, aggregates, and packages the raw metrics sent by the EUM agent12. The EUM Collector can be either a SaaS service provided by AppDynamics or an on-premises server installed by the customer12. The EUM Collector then sends the processed metrics to the AppDynamics Controller and the Events Service for storage, analysis, and visualization12. References: Overview of End User Monitoring, EUM Data
NEW QUESTION # 31
What are two reasons that would require an administrator to install the Events Service cluster manually?
(Choose two.)
- A. Security concerns with passwordless SSH
- B. Installation on SUSE Linux
- C. Installation on Windows
- D. Security requirements to install using a non-root user account
Answer: A,D
Explanation:
Explanation
According to the Cisco AppDynamics Professional Implementer (CAPI) documents, the two reasons that would require an administrator to install the Events Service cluster manually are:
Security concerns with passwordless SSH (B): This is a valid reason because the automated installation of the Events Service cluster requires passwordless SSH access to the target hosts. Passwordless SSH allows the Enterprise Console to execute commands on the remote hosts without prompting for a password. However, some organizations may have security policies that prohibit passwordless SSH access, as it may pose a risk of unauthorized access or malicious attacks. In such cases, the administrator can install the Events Service cluster manually, by following the steps described in the Manual Installation of the Events Service Cluster document1.
Security requirements to install using a non-root user account : This is a valid reason because the automated installation of the Events Service cluster requires root privileges on the target hosts. Root privileges allow the Enterprise Console to create directories, change permissions, and install packages on the remote hosts. However, some organizations may have security policies that restrict root access, as it may pose a risk of accidental or intentional damage to the system. In such cases, the administrator can install the Events Service cluster manually, by following the steps described in the Manual Installation of the Events Service Cluster document1. The administrator can use a non-root user account that has sudo privileges to perform the manual installation.
The incorrect options are:
Installation on SUSE Linux (A): This is not a valid reason for manual installation, because the automated installation of the Events Service cluster supports SUSE Linux as one of the compatible operating systems. The Enterprise Console can install the Events Service cluster on SUSE Linux hosts using the automated installation process, as long as the hosts meet the prerequisites described in the Events Service Requirements document2.
Installation on Windows (D): This is not a valid reason for manual installation, because the Events Service cluster does not support Windows as an operating system. The Events Service cluster can only run on Linux hosts, as it is based on Apache Cassandra, which is a Linux-based distributed database. The Events Service cluster cannot be installed on Windows hosts, either manually or automatically2.
References:
1: Manual Installation of the Events Service Cluster - AppDynamics
2: Events Service Requirements - AppDynamics
NEW QUESTION # 32
What are two ways in which large and extra large performance profiles differ from other profile types?
(Choose two.)
- A. They require an enterprise-grade database.
- B. They are not supported on Windows.
- C. They must be installed on a bare metal server.
- D. They must be run with the High Availability Toolkit.
- E. An alert is generated when disk space falls below 2 GB.
Answer: A,E
Explanation:
Explanation
AppDynamics performance profiles are predefined sets of system requirements and configuration settings that are designed to support different levels of load and scalability for the AppDynamics platform. The performance profiles range from small to extra large, depending on the number of agents, metrics, and events that the platform needs to handle. The large and extra large performance profiles differ from other profile types in the following ways:
They require an enterprise-grade database: The large and extra large performance profiles require an external MySQL database that is enterprise-grade, meaning that it has high availability, scalability, performance, and security features. The database should also have enough disk space, memory, and CPU resources to handle the expected load and growth. The AppDynamics platform uses the database to store configuration data, metric data, event data, and analytics data12.
An alert is generated when disk space falls below 2 GB: The large and extra large performance profiles have a built-in alert mechanism that notifies the administrator when the disk space on the Controller host falls below 2 GB. This isbecause the Controller needs enough disk space to store temporary files, logs, backups, and snapshots. If the disk space is insufficient, the Controller may experience performance degradation, data loss, or corruption. The administrator should monitor the disk space usage and free up space or add more disk capacity as needed34.
The other statements are false because:
A: They do not need to be installed on a bare metal server. The large and extra large performance profiles can be installed on any supported operating system, such as Linux or Windows, and on any supported platform, such as physical, virtual, or cloud. However, the host machine should have enough CPU, memory, and network resources to meet the performance profile requirements12.
B: They do not need to be run with the High Availability Toolkit. The High Availability Toolkit is an optional tool that can be used to configure and manage a high availability deployment of the AppDynamics platform, where multiple Controllers are clustered together to provide redundancy and failover. The High Availability Toolkit can be used with any performance profile, not just the large and extra large ones. However, the High Availability Toolkit requires a license and additional hardware and software resources .
C: They are supported on Windows. The large and extra large performance profiles can be installed on Windows Server 2012, 2012 R2, 2016, or 2019, as long as the host machine meets the performance profile requirements. However, some features or configurations may not be available or supported on Windows, such as the High Availability Toolkit, the Enterprise Console, or the Events Service12.
References: Platform Requirements, Controller System Requirements, Controller Disk Space Requirements, Controller Disk Space Alert, [High Availability], [High Availability Toolkit]
NEW QUESTION # 33
Which two choices are available when specifying an application in a URL string for the Health Rule REST API? (Choose two.)
- A. Application ID
- B. Application Name
- C. Application Alias
- D. Application REGEX
- E. Application GUID
Answer: A,B
Explanation:
Explanation
The Health Rule REST API allows you to create, configure, update, and delete health rules for multiple applications simultaneously. To use this API, you need to specify the application in the URL string. You can use either the application ID or the application name for this purpose. The application ID is a unique numeric identifier for each application in the Controller. The application name is the display name of the application in the AppDynamics UI. You cannot use the application alias, GUID, or REGEX for the Health Rule REST API. References: Health Rule API and Retrieve All Business Applications in the AppDynamics documentation.
NEW QUESTION # 34
A company set up an on-premises AppDynamics Controller and an on-premises Events Service cluster. What describes setting up this Events Service cluster?
- A. The Controller must be able to initiate communication with the Events Service cluster.
- B. There is no need for a load balancer or virtual IP address in front of the Events Service cluster.
- C. The Events Service cluster must be able to initiate communication with the Controller.
- D. The Events Service API ports cannot be reconfigured from the default 9080/2081.
Answer: A
Explanation:
Explanation
The Events Service is the on-premises data storage facility for unstructured data generated by Application Analytics, Database Visibility, and End User Monitoring deployments. The Events Service can be deployed as a single node or a cluster of three or more nodes, depending on the data volume and availability requirements.
The Controller and other Events Service clients connect to the Events Service to store and retrieve analytics data. Therefore, it is essential that the Controller is able to initiate communication with the Events Service cluster, using the Events Service API ports (default 9080/2081). The Events Service cluster does not need to initiate communication with the Controller, as it only responds to the requests from the clients. The Events Service API ports can be reconfigured from the default values, if needed, by modifying the conf/events-service-api-store.properties file on each node. However, the clients must also be updated with the new port values. It is also recommended to use a load balancer or a virtual IP address in front of the Events Service cluster, to provide a single endpoint for the clients and to enable load balancing and failover among the nodes. References: Events Service Deployment, Install the Events Service on Linux, and Install the Events Service on Windows in the AppDynamics documentation.
NEW QUESTION # 35
Which two statements are true when updating the Database Agent? (Choose two.)
- A. The Database Agent must be stopped and restarted during the upgrade.
- B. All data collectors created from the previous agent must be migrated to the new agent.
- C. Controller-info.xml is the only file that needs to be migrated from the previous agent to the new agent.
- D. If the agent is moved to a new location during the upgrade, the AppDynamics Controller must be reconfigured to reference the new location of the agent.
- E. After the Database Agent is upgraded, the AppDynamics Controller must be restarted.
Answer: A,C
Explanation:
Explanation
According to the Cisco AppDynamics Professional Implementer (CAPI) documents, when updating the Database Agent, you need to follow these steps12:
Stop the agent as described for your specific installation in Start and Stop the Database Agent.
Make a copy of the existing agent directory, <db_agent_home>. Backing up allows you to revert to the previous agent installation if you need to. You can also copy over the controller-info.xml configuration file to the new installation to ensure the agent configuration is maintained.
Install the Database Agent as described for your specific installation in Administer the Database Agent.
Copy the <backup_db_agent_home>\conf\controller-info.xml file to the new installation directory,
<db_agent_home>\conf. To ensure the agent configuration is maintained, copy the
<backup_db_agent_home>\conf\controller-info.xml file to the new installation directory,
<db_agent_home>\conf.
Start the new agent. See Start and Stop the Database Agent.
Verify the Database Agent Installation. See Verify the Database Agent Installation.
Therefore, the correct statements are:
The Database Agent must be stopped and restarted during the upgrade. (A) Controller-info.xml is the only file that needs to be migrated from the previous agent to the new agent.
(D)
The incorrect statements are:
If the agent is moved to a new location during the upgrade, the AppDynamics Controller must be reconfigured to reference the new location of the agent. (B) This is not true because the controller-info.xml file contains the information about the Controller host, port, account name, access key, and SSL settings. As long as this file is copied to the new agent location, the Controller does not need to be reconfigured.
All data collectors created from the previous agent must be migrated to the new agent. This is not true because the data collectors are configured on the Controller UI, not on the agent. The agent collects the metrics from the databases and sends them to the Controller. The data collectors do not need to be migrated to the new agent.
After the Database Agent is upgraded, the AppDynamics Controller must be restarted. (E) This is not true because the Controller does not depend on the agent version. The agent and the Controller are compatible as long as they meet the Agent and Controller Compatibility requirements.
References:
1: Upgrade the Database Agent - AppDynamics
2: Release Upgrade Checklist for Database Agents - AppDynamics
NEW QUESTION # 36
Which two statements are true regarding the AppDynamics REST API for retrieving metrics? (Choose two.)
- A. Minimum and maximum values are meaningful for all metric types.
- B. Median is one of the returned values,
- C. End-time value must be provided if using the time-range-type of AFTER_TIME.
- D. Metrics can be retrieved for a fixed time range.
- E. Wildcards can be used in the REST API metric path.
Answer: D,E
Explanation:
Explanation
The AppDynamics REST API for retrieving metrics allows you to get values generated for metrics by specifying the path of the metric and the time frame for the data1. The following statements are true regarding this API12:
Metrics can be retrieved for a fixed time range. You can use the time-range-type parameter to specify a fixed time range such as BEFORE_NOW, AFTER_TIME, or BETWEEN_TIMES. You can also use the duration-in-mins parameter to specify the length of the time range in minutes.
Wildcards can be used in the REST API metric path. You can use the asterisk () character as a wildcard to match any metric name or part of a metric name. For example, you can use the metric path Business Transaction Performance|Business Transactions||*|Average Response Time (ms) to retrieve the average response time for all business transactions in all tiers. References: Retrieve Metric Data, Retrieve Metric Hierarchy
NEW QUESTION # 37
Which AppDynamics Controller port(s) does the EUM Server require access to in a configuration where the EUM Server and Controller are on separate hosts (split-host configuration)?
- A. dedicated EUM HTTP(s) ports
- B. Controller primary HTTP{s) port
- C. GlassFish administration port
- D. Controller database and HTTP(s) ports
Answer: B
Explanation:
Explanation
In a split-host configuration, where the EUM Server and Controller are on separate hosts, the EUM Server requires access to the Controller primary HTTP(s) port. This is because the EUM Server needs to communicate with the Controller API server to send data and receive configuration information. The default primary HTTP port for the Controller is 8090 and the default primary HTTPS port is 81811. The dedicated EUM HTTP(s) ports are used by the EUM agents to send data to the EUM Server, not by the EUM Server to access the Controller2. The GlassFish administration port is used to access the Controller Admin Console, not by the EUM Server3. The Controller database port is used by the Controller to connect to the MySQL database, not by the EUM Server4. References: Controller Port Settings, Configure the Port for the EUM Agent, Access the Administration Console, Controller System Requirements
NEW QUESTION # 38
Which data is unavailable in a hybrid deployment of AppDynamics where the AppDynamics Controller and Events Service are installed on-premises and the EUM Server is hosted inAppDynamics' SaaS cloud?
- A. End-User Monitoring browser snapshots
- B. End-User Monitoring resource loading times
- C. End-User Monitoring session information
- D. Analytics metrics for End-User Monitoring data sets
Answer: D
Explanation:
Explanation
In a hybrid deployment of AppDynamics, where the AppDynamics Controller and Events Service are installed on-premises and the EUM Server is hosted in AppDynamics' SaaS cloud, the data that is unavailable is the analytics metrics for End-User Monitoring data sets. This is because the analytics metrics require the Events Service to store and process the unstructured data generated by the EUM agents. However, in a hybrid deployment, the EUM Server and the Events Service are not connected, and the EUM Server does not send the EUM data to the Events Service. Therefore, the analytics metrics for EUM data sets, such as browser records, mobile snapshots, network requests, and custom events, are not available in the Controller UI or the Analytics UI1. The other data, such as resource loading times, session information, and browser snapshots, are available in the EUM Server UI, as they are stored and displayed by the EUM Server itself2. References: Hybrid Deployment and EUM Data Sets in the AppDynamics documentation.
NEW QUESTION # 39
......
Cisco 500-430 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
500-430 Premium Exam Engine - Download Free PDF Questions: https://braindumps.testpdf.com/500-430-practice-test.html
